Hp windows 8 legacy mode

My purpose of this server is to run Hyper-V. Saturday, March 19, AM. This is very helpful if you have two or more operating systems which require different bootloaders. UEFI offers secure boot which can prevent boot-time viruses from loading. Monday, March 21, AM. Hello, What generation of HP? My LinkedIn profile. Saturday, March 19, PM.

Thank you very much. It is HP Gen9 server with Windows standard. Click Browse Files to choose the files to back up, and then click Next. Select the files you want to back up, and then click OK. Recovery Manager scans the computer for storage devices. Select the storage device to save the backup, and then click Next.

Depending on the media selected to store the backup files, the computer prompts you to insert a blank disc or a USB flash drive. Insert the media into the computer, and then click Next again to confirm the backup. Recovery Manager displays the progress in backing up and saving the files to the backup media. When Recovery Manager is finished backing up files, remove the backup disc or storage device, and then click Next to continue the recovery process.

Read the on-screen information, then disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord.

Select Recover without backing up your files , and then click Next to continue. Do not interrupt HP Recovery Manager during the recovery process. When recovery preparation is complete, click Continue to proceed to the installation phase of the recovery process. The computer restarts several times during the recovery. This is normal. Do not close, shut down, or disconnect the computer while HP Recovery runs. Recovery Manager reformats the Windows partition and reinstalls the original software.

After the system recovery is complete, click Finish to restart the computer. Complete the setup screens and wait until the computer finishes the setup. Once the setup is complete, turn off the computer, reconnect all devices and cables, and then turn on the computer.

Before using the computer, update and protect your computer by reinstalling any virus and security software that was installed before the system recovery. Reinstall any software programs that were added after purchasing the computer, as well as any files that were backed up. After completing the steps above, use the steps in the following documents, as appropriate, to ensure your computer is up to date and secure:. Recovery when Windows 8 does not start correctly If Windows 8 does not open correctly, perform the following steps to recover the computer:.

If an error message indicates that System Recovery cannot be run from the startup screen, a set of recovery discs or a recovery USB flash drive is needed to perform a system recovery.

Follow the instructions listed in one of the following sections, depending on the recovery media available: Recovery from recovery discs Windows 8 or Recovery from a USB flash drive Windows 8. Turn on the computer and repeatedly press the F11 key, about once every second, until the Choose your keyboard layout screen or Choose an option , screen displays and then follow these instructions:.

In Windows 8 click to select the keyboard layout. This is not available on Windows 8. If the recovery partition on the hard disk drive is functioning correctly, the Choose an Option screen displays. Click Troubleshoot. Insert the media into the computer, and then click Next. If you have already backed up personal files or you do not want to back up personal files, select Recover without backing up your files , and then click Next.

Recovery from recovery discs Windows 8 Perform the following steps to recover the computer using a set of recovery discs either CDs or DVDs. These discs can be a set that was received from HP Support or discs that you created. You can obtain recovery discs from HP Support or use Recovery Manager software to create a set of recovery discs yourself. HP recommends creating a set of recovery discs when you receive your computer and storing them in a safe place.

Recovery Discs sent to you from HP Support can take as long as 4 to 6 hours to complete system recovery, but recovery discs that you create often take less time to complete system recovery. Immediately press the Escape key repeatedly, about once every second, until the Startup Menu opens. When recovery starts, continue using the steps to complete recovery.

For detailed instructions, see the Disabling Secure Boot on a notebook computer Windows 8 section in this document. A window might display and prompt you to choose whether to run Recovery Manager from the hard disk or from the disc inserted.

If this window displays, select Run program from media , and then click Next. User Selection : Select Compression to make your backup file smaller, or select No Compression to make no change to the size of your backup file, and then click Next. Create a backup of your files on a USB flash drive for notebooks and newer white background If you have not done so already, follow these steps to create a backup of your files on a USB flash drive. The computer prompts you to insert a blank USB flash drive.

When Recovery Manager is finished backing up files, remove the backup disc or storage device, and then click Finish to continue the recovery process. Create recovery media on a USB flash drive for notebooks and newer If you have not already created recovery media on a USB flash drive, create it using the following steps. If the size of the USB drive is larger than 32 GB, the extra size on the flash drive might not be usable after the recovery media is created.

Please be aware that all data on the selected USB flash drive becomes lost after the recovery media is created. Click I Accept to the notification that only one set of recovery media can be made. When inserting the flash drive, the drive is recognized and selected on the screen. Watch as the creation process prepares the disk, copies the image, and verifies the disk.

The disk is referring to the USB flash drive media. The recovery flash drive has been successfully created. Remove the flash drive, label it, and put it in a safe place for storage. You can use the instructions in the Recovery from recovery discs Windows 8 section for clarification on the process for recovering the computer using a USB flash drive. Press and hold the power button to turn off the computer.

Use the up or down arrow key to select the USB flash drive, and then press Enter. A window might display and prompt you to choose whether to run Recovery Manager from the hard disk or from the USB flash drive inserted.

If this window is displayed, select Run program from media , and then click Next. Once the recovery and setup are complete, turn off the computer, reconnect all devices and cables, and then turn on the computer.

Disable secure boot on a notebook computer Windows 8 In some cases, it might be necessary to disable secure boot in the BIOS in order to start the computer using recovery discs.

If you are able to boot from the Recovery media or not, it is very important to reverse the changes made in the BIOS , this means you need to load the BIOS default settings. Otherwise this might cause instability in the system when making updates recommended by HP. Hey I want to cahnge my boot option to legacy mode from uefi mode.

Tags 2. Tags: hp envy m6- ndx. Accepted Solutions. Level Message 4 of 4. Hi, If your HDD has a guid partition table, the current OS will have to be installed in 'uefi' mode - the only way around this would be to reformat the drive with MBR and reinstall the OS using a boot option cdrom or flash drive that does not have a uefi suffix.

Yes No. Message 2 of 4. Hi, You can do this as follows. On tablets, common buttons are Volume up or Volume down find more common keys and buttons.

On the boot device menu, select the command that identifies both the firmware mode and the device. You might see separate commands for the same device. Each command uses the same device and media, but boots the PC in a different firmware mode. Query the registry to determine which mode the device is in.

You can do this from the command line:.